Component Supply

HomeComponent Supply

Rosh Engineering is the UK agent for ELEQ Current Transformers based in Steenwijk, Holland and Kerpen Germany. ELEQ is the new name for the merged organizations formed out of Netherlands based Faget and Germany’s KWK.

ELEQ is the market leader in Holland with over 60% of the market share since formation in 1946 and has a growing international reputation.

ELEQ specializes in products for the Transmission and Distribution (T&D) market with products for use in Power Transformers and Switchgear applications.

In particular ELEQ’s sub assembly construction for Current Transformers, with each application standardised to a customer specification, offers a full solution for CTs. 

The main advantage to the sub-assembly is that installation problems are taken away due to the fact that the current transformers are combined and attached to a framework. This allows for quick and efficient installation. Each sub-assembly undergoes single and stack testing to ensure compliance with specification.

Current Transformer

ELEQ also manufacturers a range of low and medium voltage current and voltage transformers with several products for outdoor use.

For more information see :

Component Supply

SK Forumulations

SK Formulations’ fast drying, environmentally friendly, water based coatings using their patented polymer design offer considerable productivity gains. SK offers better protection from 2 applications of the same SK product than a 3 coat alkyd system. It is easy to over-coat with no shot blasting required and unlike other water based paints will touch dry at 6o°C ready for over coating in under an hour.

Following impressive success in the Middle East and Asia, SK Formulations Rosh Engineering are the UK & Ireland appointed distributor.

SK formulations performed accelerated testing on the coatings. When tested under accelerated conditions, this water based paint performed far better than current three-pack alkyd systems on the market.

Using a two coat water-based system rather than a traditional three coat system. Compared with traditional methods of using a three coat system while painting transformers, SK’s anticorrosion coatings allow transformers to be painted just twice, increasing productivity, boosting margins and competitiveness.

Environmentally Friendly –  This revolutionary water based paint has zero emissions so can be applied in quantity without registration or penalty. Empty paint tins can also be disposed of as regular waste.

Also available within the range of coatings is a Cold Galvanizing Coating (XLC-0700) and an Electric Insulation Coatings (XLC-0770)

For more information see:

Silica Gel & Dehydrating Breathers

Replacement silica gel breathers or fresh stocks of silica gel can be supplied as well as dehydrating breathers for all makes and sizes of transformers.

Protection Devices and Monitoring Instruments

Oil Temperature indicators and Winding Temperature indicators as well as Buccholz Relays and real time gas monitoring equipment can be supplied and installed as required. Explosion vent diaphragm material or pressure relief devices can also be supplied.

New Transformers

New transformer specifications can be drawn up and transformers supplied to meet any application. Supply and installation of transformers to meet existing envelopes is a speciality.

Cooling Radiators

Transformer cooling radiators of any size, and bespoke manufactured to suit any age or design of transformer.

Miscellaneous Items

Any transformer associated part can be supplied from oil level sight glass and level gauges, through to valves, pumps, expansion coupling and control kiosks. Call us with your requirements.

Loading posts...
Sort Gallery